Greatly improved operability, safety and transportability. |
 |
|
|
|
| MANTIS 125 |
 |
|
 |
 |
| Code No. |
.gif) 475140 |
Model
|
MANTIS XB125 |
| Cutting capacity |
90ºROUND PIPE φ125
SQUARE PIPE  100 |
| Motor |
Single phase 220V (50/60Hz)
Split-phase Induction motor 200W
with overload protection |
| Pulley speed (min-1) |
70 (50Hz), 84 (60Hz) |
| Dimensions (mm) |
L780 x W340 x H335 |
| Weight (kg) |
33 |
| Standard accessories |
14-tooth HSS blade ( x 1) (475312)
Hex key wrench 5mm |
|
| |
|
|
| |
|
| MANTIS 120A |
 |
|
 |
 |
| Code No. |
475142 |
Model
|
MANTIS XB120A |
| Cutting capacity |
90º： ROUND PIPE φ120
SQUARE PIPE 105
45º： ROUND PIPE φ50
SQUARE PIPE 50 |
| Motor |
Single phase 220V (50/60Hz)
Split-phase Induction motor 200W
with overload protection |
| Pulley speed (min-1) |
70(50Hz), 84(60Hz) |
| Dimensions (mm) |
L780 x W340 x H335 |
| Weight (kg) |
35 |
| Standard accessories |
14-tooth HSS blade ( x 1) (475312)
Hex key wrench
5mm
Hex socket wrench 17mm |
|
| |
|
|
| |
|
|
Mantis Saw Blades (Optional extras)
|
Be sure to use only recommended blades.
| Code no. |
Material |
No. of teeth
(teeth / inch) |
No. of blades
included |
| 475302 |
Alloy |
14 |
10 |
| 475303 |
18 |
| 475312 |
HSS
(Bimetal) |
14 |
5 |
| 475313 |
18 |
| 475314 |
24 |
|
|
| |
Selecting the Cutting Load and Blade
|
Use the table below to select the blade and cutting load that are appropriate
for the type, diameter, wall thickness etc. of the material to be cut.
| Code no. |
Alloy |
High-speed steel |
| 14 |
18 |
14 |
18 |
24 |
| Steel pipe |
8A - 25A |
L |
L |
L |
L |
|
| 32A - 80A |
M |
M |
M |
M |
|
| 90A - 100A |
H |
H |
H |
H |
|
| Stainless steel |
Schedule 40 |
8A - 25A |
|
|
L |
L |
|
| 32A - 80A |
|
|
M |
M |
|
| 90A - 100A |
|
|
H |
H |
|
| Thin wall stainless steel (SU pipe) |
13 - 100Su |
|
|
|
|
LL |
| Resin pipe (Polyethylene pipe / Vinyl chloride pipe) |
LL |
LL |
LL |
LL |
|
| Conduit |
Thick steel |
|
M |
|
M |
|
| Thin steel |
|
L |
|
L |
L |
| Cast iron pipe |
H |
|
H |
|
|
| Steel |
Section steel |
 1.9mm |
|
|
|
|
LL |
| 2 - 3.4mm |
L |
L |
L |
L |
|
| 3.5 - 4.9mm |
M |
M |
M |
M |
|
| 5 - 7.9mm |
H |
|
H |
|
|
 8mm |
H |
|
H |
|
|
| Round bar |
15mm |
M |
M |
M |
M |
|
| 16 - 50mm |
H |
|
H |
|
|
| 51 - 80mm |
|
|
H |
|
|
LL= ultra-light load L= light load M = medium load H = heavy load
Notes :  The figures in the table are examples only. Select the blade and cutting load to match the actual material to be cut.
When selecting the proper number of teeth in the blade, use the following guideline: thickness of material = 2 teeth. |
| |
